DNG

hello i hope correct forum ask question. reading on x509 v3 standard , cryptography in general when can across an statement said ssl (e.g. ssl hand-shack , subsequent secure channel setup) not bother check crl given certificate, correct? in other words cdp may published in certificate ssl protocol not retrieve/check crl located cdp check if certificate in question has been revoked or not. not microsoft specific question (rather protocol question e.g. behaviour of ssl protocol). read information respected source (although document little dated) if case (and perhaps question pki/ssl type forum) can browse web site valid (notafter still within date) certificate (which been revoked ca) unaware of , still setup secure channel web site , perform transactions. can please enlighten me on please thanks aanotheruser__ aanotheruser__ this once true older versions of internet explorer. since ie 7 (i believe) default behavior check revocation. can see in registry:...

every often, have application not allow new logins.  have taken process dumps spoolsv, cpsvc , single printisolationhosts  process, have high thread counts of 763, 214 , 715.   normal thread counts 26, 60 , 5 or 6.  i teaching myself use windbg, process explorer , reading forum posts.   assistance appreciated.  i  have screen shots spoolsv, printisolationhost , cpsvc,  analyze wait chain selections resource monitor, show waiting on spoolsv. from reading several posts, have used windbg process dumps finding locks , threads "criticalsection" entries.  using information have tried find if there locked file causing issue.  microsoft (r) windows debugger version 6.3.9600.17200 x86 copyright (c) microsoft corporation. rights reserved. loading dump file [c:\spoolsv.dmp] user mini dump file full memory: application data available ************* symbol path validation summary ************** response...

tried 2 installations of windows server 2012 standard. 1 clean install , other upgrade of web server. trying run windows server backup (single backup).  selecting custom (adding items), vss full copy, , remote file share backup. it starts creating volume shadow copies , seems hit part removing deleted items immediate "failure: system reserved: process cannot access file because process has portion locked" i reboot system, nothing start backup , occurs.  any ideas or suggestions? hi, it seems files locked applications. based on current situation, let’s try perform clean boot , check result. detailed steps, may refer following microsoft kb article. although kb article applies windows 7, steps similar windows server 2012. how troubleshoot problem performing clean boot in windows vista or in windows 7 http://support.microsoft.com/kb/929135 what’s result in clean boot? regards, arthur li technet community support ...

i reading following technet article http://technet.microsoft.com/en-us/library/ff919512%28v=ws.10%29.aspx explains how configure "enable identity privacy", has following "tip": "the nps policy 802.1x wireless must created using nps connection request policy . if nps policy created in using nps network policy , identity privacy not work. " i confused because cannot specify group membership conditions under "connection request policy" can in "network policies".  perhaps article means need configure authentication method within "connection request policy" instead of "network policies"? any appreciated. thanks hi krakatao, >>perhaps article means need configure authentication method within "connection request policy" instead of "network policies"? your understanding correct. need check "override network policy authentication settings" in connection reques...

what memory dump, page file? dear kalyan99, during last month have asked lot of questions absolutely not related terminal services. of questions required explanation on basic things. higly recommend research , read more before asking questions. after if have questions please post them appropriate sections of technet forum. can find them here: http://social.technet.microsoft.com/forums/en-us/category/windowsserver   сила в справедливости Windows Server  >  Windows Server General Forum

hey have little inventory script , add last user used machine. know can query ad , find user logged on query single machine , find last user of machine. haven't been able find way this. know find info in event viewer under security or find user account folder newest, have filtering both of these methods. what's best way go doing this? thanks!! check out: http://blogs.technet.com/b/heyscriptingguy/archive/2007/01/23/how-can-i-get-the-name-of-the-last-user-to-log-on-to-a-computer.aspx al dunbar -- remember 'mark or propose answer' or 'vote helpful' appropriate. Windows Server  >  Windows PowerShell

dear all i asking updating knowledge. recently 1 interviewer asked me how restore dc backed 4 months ago ? i don't know answer can body told me possible or not ?   sorry if posting in wrong forum.   thanks  vijay   hello,      tricky question depends upon number of domain controllers in doamin. life of system state depends upon tombstone lifetime. default vlaue windows 2003 tombstone life  is 60 days.this value can set on directory service (ntds) config object. read this   http://support.microsoft.com/kb/216993 http://www.virmansec.com/blogs/skhairuddin Windows Server  >  Directory Services

i installed without apparent incident sfu 3.5 on windows 2003 server. nothing works... start command prompt and 'ls' sits there.... c shell, and a window opens no prompt appears, nothing. same korn shell.  i previously installed gnuwin32 and when opening gnuwin32 shell, unix commands work fine... on gnuwin32 shell opening, script prepends path path. on running command.com believe should sfu shell, the gnuwin32 path no longer in path expected, , c:/sfu/common is... yet above, nothing @ works. ideas? did not reboot after installing sfu, install did not ask me to, can recall. thanks help. hi,   there several reasons issue in interoperable environment between windows , unix. please refer following online document check if helpful you?   windows services unix 3.5 white paper http://technet.microsoft.com/en-us/library/bb463214.aspx   remote shell services in sfu http://technet.microsoft.com/en-us/library/bb463213.aspx   meanwhile, issue regarding services unix,...

good morning, i work in remote desktop environment. all files use job network resources. if delete 1 file these resources, can't see in recycle bin. is possible setting puttuing network files recycle bin when delete them? thanks support hi, for issue, scared inform recycle bin stores files deleted hard drives, not removable media, such memory cards , floppy disks. doesn't store files deleted network drives. this, recommend use shadow copy as best option. however, may third-party applications achieve this. hope helps! thanks. Windows Server  >  Remote Desktop Services (Terminal Services)

buenas todos. mi problema es el siguiente (no sé si tiene solución). adjunto imagen que es más fácil de explicar.  quiero ampliar f. para ello, reduzco c, pero el espacio no asignado me lo genera la izquierda de f, así que al final no lo puedo ampliar.  ¿qué se puede hacer? ¿hay alguna solución? gracias de antemano!! hola victorlopez, que yo sepa no hay solución sólo con windows, ya que no permite desplazar los volúmenes, y cuando agranda siempre lo hace del lado derecho hace años había probado aplicaciones de terceros que permitían hacer lo anterior, no sé si todavía existen, pero eran muy riesgosas, ya que en algunas ocasiones dejaban un problema de mal "alineamiento" de las particiones, y el rendimiento se ponía pésimo; la única solución era reinstalar o reparticionar y recuperar desde una copia de seguridad   guillermo delprato buenos aires, argentina el blog de los paso paso mvp - mcse - mcsa2012 mcitp: enterprise administrator ...

can use windows update to get revocation lists root certificates. no, can't. windows update not provide updates 3rd party companies , products. my weblog: http://en-us.sysadmins.lv powershell pki module: http://pspki.codeplex.com windows pki reference: on technet wiki Windows Server  >  Security

a customer of ours decided change .nl domain spiffy new .com domain. to falls task of implementing changes on 2 servers. 1 server runs exchange , owa, other hosts iis6 website. @ first seemed pretty straightforward request 2 new csr's 2 affected websites (mail.bleep.com , somethingelse.bleep.com). having generated proper csr correct private key , installing certificate succes, new problem emerged. locally signed certificate started complaining inconsistency in names (the name of site isn't present in locally signed one). having faced these things leaves me wondering if there clear documentating concerning implementation new internet domain name in iis 6 , exchange 2007 environment. i'm expecting heavy usage of certutil , exchange management shell... right i'm worried changing 1 thing lead thing failing. thanks in advance , insights can give. i believe problem related not including correct subject alternate names in certificate. mcp windows server mcts ...

how can release device cal license offline rds license server? if there 2 license servers installed , procure additional licenses, how can additional licenses redistributed among existing 2 rds license servers? if 50 devices have been allocated 50 device cals, , out 50 devices, 10 devices either formatted or discarded, in case how can reassign 10 device cals new devices? does client device cals expire? if yes then, can expired device cal reused against device? can policy expiration of device cal modified? if multiple cal license associated single device, how can cal released reusability? if have 200 device cal licenses , assigned 200 devices, happen when new device tries access rds server? temporary access license or not connected how can identify credentials other device name ip address, login user name etc rd licensing server? can single rd license server have both device based , user based cal license? in case rd license server down, users (device assigned device cal) able c...

i try launch scheduled task on remote 2008 r2 server 2003 server domain account full permissions. keep getting message saying 'the specified task name "notepad" not exist in system'. ("notepad" test task created opens notepad). the command i'm using is> schtasks /run /s <server ip> /tn notepad i have check task name , correct. when use same command locally on 2008 server (from local administrator account or domain admin account) 'error: access denied.' if drop "/s <server ip>" when using command locally on 2008 server task runs fine. if open command window 'as administrator' , /s works fine need able launch task specific administrator user not administrator. hi, thanks response. please take @ article: scheduling tasks http://technet.microsoft.com/en-us/library/cc786711(v=ws.10).aspx regards. vivian wang technet community support ...

could tell me why network utilization system process reaches 50% when send big data somewhere else? expected behavior? mean there threshold network utilization each process? courage grace under pressure! hi, thank post. “could tell me why network utilization system process reaches 50% when send big data somewhere else?” – please update network driver , ensure nic speed/duplex settings on server matches ones on switch connected to. regards nick gu - msft Windows Server  >  Platform Networking

hi, when add group remote desktop users in computer management isn't updated in server manager > remote desktop services > <collection name>. when add group in server manager, automatically updated in remote desktop users in computer management. know if bug or design? hi, this normal , expected.  when add group via collection properties, granting group [by extension] access servers (there many) part of collection, automatically adds group to local rdu group on each rdsh server is in collection. when add group local rdu group on specific rdsh server modifying group membership on specific server.  rds collection separate entity server. the idea able manage multiple servers make rds deployment single console. -tp Windows Server  >  Remote Desk...

work company uses windows8 base platform it's application.  we're having issues touch screen randomly losing touch no reason @ acer touch screens. we've been able isolate of problems acer touch screen not being compatible usb power management feature built in windows. our win7 able use below powershell script disable of usb devices power management without having go through each usb device in device manager. $hubs = get-wmiobject win32_usbhub $powermgmt = get-wmiobject mspower_deviceenable -namespace root\wmi | {$_.instancename.contains($hubs.pnpdeviceid)} foreach ($p in $powermgmt) {     $p.enable = $false     $p.psbase.put() } same script doesn't work windows8.  any 1 know how modify script above make work on windows8?? thanks! ok, less hour...lol.  i had done yesterday before left work go home.   anyways here's code.  i've tested works on windows 8.1 box. running code on box resulted in $powerm...

hey, i had on synology iscsi lun created.   now connect iscsi lun windows server 2012r2. create on connection vhdx virtual harddisk. when try ad vhdx file vm shared disk become error storage not right shared virtual disk. thanks help stefan   viele grüße stefan kontakt unter info@it-kiessig.de well, there several ways work this. make strong argument of them. i'm sure there other ways haven't thought about. i'm trying is, i'm give possible solution, not solution. i'm assuming you're going use synology store , cannot present smb 3.0 shares. here's do: on synology, create 512 mb lun , data lun of whatever size. can make multiple data luns if want; tend split vms across @ least 2 can move things around if goes awry or isn't want. connect existing host luns don't configure them. create single-node cluster. format 512 mb lun ntfs, no drive letter, , leave cluster disk. format other lun(s) wish. ntfs preferred refs acceptable. co...

i have had issue beginning.  if have server reboot after updates restart windows loading window , go black screen , nothing else.  have force shutdown , boot , tell boot normally, works.  recovery feature not seem fix whatever issue has.  i appreciate assistance in fixing issue. windows server 2008 r2  service pack 1 thanks linda croke tech director eswood elementary linda croke hi linda, >> if have server reboot after updates restart windows loading window , go black screen , nothing else.  you take @ windows updates when issue happened , uninstall recent updates manually , reboot again test if issue still exists. did see error messages in system event log? the following link maybe helpful issue if have seen error ids: https://support.microsoft.com/en-us/kb/975484 >> recovery feature not seem fix whatever issue has.  after recovery system, not install drivers or updates test whether drivers or upda...

hi all, i've got 1 upstream wsus server , 4 downstreams wsus servers in replica mode. i use wsus package publisher locally publish updates on upstream server. when delete update upstream server, update file still present in "wsuscontent" folder , "updateservicespackages" folder. use cleanup wizard delete file "wsuscontent" folder , integrated function of wsus package publisher remove "updateservicespackages" folder. work fine. synchronize replica server upstream server, , file remove "wsuscontent" folder on replica server. but update still present in database of replica server ! running cleanup wizard on replica server didn't help. how can delete unpublished udpates database on replica server ? ok, i've got it. i thought can not else view updates on replica server. in fact, can delete update. modified wsus package publisher can delete updates when connected replica server. david courtel it technician ...

hi all, i trying better understand certificates , pki. i totally understand how certificates work , totally understand how pki works have been doing reading morning certificates , pki think have got myself confused. ok . . if go internet explorer > internet options > tools > content > certificates see number of tabs - personal - other people - intermediate certificate authorities - trusted root certificate authorities - can see lots of vendors certificates in list under trusted root certificate authorities. if go website such paypal (who secure , use certificate) certificate appear? downloaded computer or not? understand certificate holds public key not understand certificate , comes from? why internet explorer hold certificates people verisign? thought verisign ca issue certificates people such paypal. don't quite understand why cas have certificates listed within interne explorer. sorry if explanation isn't clear . . . can m...

hi, need generate 10gb of files organised in nested folder structure added source data share can test data in  migration. can recomend utility can generate sample office data share, appreciated. please email me if need clarification of requirement, ta hi,   please check following link.   create dummy files of size easily http://www.howinthetech.com/create-dummy-files-of-any-size-easily/   important note: response contains reference third party world wide web site. microsoft providing information convenience you. microsoft not control these sites , has not tested software or information found on these sites; therefore, microsoft cannot make representations regarding quality, safety, or suitability of software or information found there. there inherent dangers in use of software found on internet, , microsoft cautions make sure understand risk before retrieving software internet.     best regards, vincent hu   ...

hey need sccm log files few hundred machines in few labs. have no idea how file , how store on computer. get-childitem \\ceit2321104x*\c$\windows\temp\sccm_logs | sort-object length -descending $outputfile = $env:userprofile + "\desktop\test.txt" function get-autocad { process { get-childitem "\\ceit2321104x016\c$\windows\temp\sccm_logs" | {$_.attributes -eq 'directory'} } } get-adcomputer -searchbase 'ou=ceit,ou=tsvc,ou=labs,ou=devices,dc=ad,dc=test,dc=edu' -filter {name -like 'ceit2322102' } | select-object -expandproperty name | get-autocad | out-file $outputfile #-and name -like 'ceit2322103' -and name -like 'ceit2322120' -and name -like 'ceit2551202' , -like 'ceit2551204' i've been messing around these , have had no luck far. pretty sure need use get-childitem , output somehow or set equal something. have little knowledge of powershell , appreciate...

hello all, we have implement active directory on windows server 2012 r2. we have configure group policy deploy proxy ip address change internet explorer. policy not work on client machine. client environment mixed environment. using windows 7 pro ie 8, 9 , 10. user use windows 8.1 pro. we have try setting per blog. not work. configuration find windows server 2012 not windows server 2012 r2. please suggest hi,   am 03.02.2016 um 04:47 schrieb parvez islam: > client environment mixed environment. using windows 7 pro ie > 8, 9 , 10. user use windows 8.1 pro.   ie maintainance not work in ie10 , above. use gpp internet settings , don´t forget press "f6" change color green ..   mark -- mark heitbrink - mvp windows server - group policy   homepage: http://www.gruppenrichtlinien.de - deutsch gpo tool: http://www.reg2xml.com - registry export file converter   ...

hello, i have word 2007 file track how many times it gets printed. when open file , print it see printed on the hard copy print count. so if i printed file 5 times , open , print 6th time, it should display 6 on hard copy. thanks...b  update....i found macro below , created bookmark show number of prints.  however, possible assoicate or call macro when user attempts click on file>print or clicks printer icon? when macro runs box appears prompting user enter number of "copies" send printer. sub myserial()     dim rngseriallocation range     dim intserialnum integer     dim strserialnum string     dim doccurrent document     dim intnumcopies integer     dim intcount integer     ' set ref current active doc     set doccurrent = application.activedocument     ' set ref...

we have of our printers installed on either print server or have own ethernet card installed on network. due location of of our pc's printers usb printers installed on local desktop , brought terminal server session.  our software looks ***printername***(redirected 7) number redirect changes each time user logs terminal services.  this causes our software not find correct printer of time on distant workstations. is there way lock redirect name? on server 2003 show ***printername***(on pcname). thanks in advance! hi, there no built-in method lock redirected printer name.  server 2003 has this behavior well, names "printername (from pcname) in session 7".  there third-party ts universal printer driver solutions allow set redirected printer naming pattern in such way printer name remains same session session.  example, tricerat screwdrivers. -tp Windows...

dear all, i got error message "there problem windows installer package. program run part of setup did not finish expected. contact support personnel or package vendor." while wsus 3.0 sp2 installation on w2k8 r2 standard 64bit. here's wsussetup.log: 2013-01-18 12:07:08  success   mwussetup          detected setup launched through server manager 2013-01-18 12:07:09  success   mwussetup          validating pre-requisites... 2013-01-18 12:07:09  error     mwussetup          failed determine if higher version of wsus installed. assuming not... (error 0x80070002: system cannot find file specified.) 2013-01-18 12:07:09  error     mwussetup          wsus outdated. not block setup (error 0x00000000: operation comple...

installed rds licensing server on windows server 2008 r2 datacenter vm.  rds license server activated.  per device cals both 2003 ts , 2008 rds installed. all citrix presentation server 4.5 on windows 2003 r2 x64 sp2 changed use license server , confirmed requesting per device cals - have.  servers found licensing server and a popup box declared it as valid windows 2003 ts licensing server, when updated. the rds server not show licenses being issued, have error in event log repeatedly: log name:      system source:        microsoft-windows-terminalservices-licensing date:          9/3/2010 9:04:04 am event id:      21 task category: none level:         warning keywords:      classic user:        ...

i've read numerous ideas , suggestions gathering local group members, each fall short of goal. i need enumerate the local administrators group of every member server in forest , enumerate nested groups well. here's list of requirements script need. hope can help. 1. query forest list of domains.  query each domain list of member servers. no desktops, no dcs. 2. foreach member server - enumerate members of local administrators group. 3. foreach member - output domain , username 4. if member ad group, enumerate it's members.  if there's nested group within group enumerate etc. we may have nested groups 2 levels deep. for example: domaina global group may nested domainb domain local group nested server's local administrators group.  output this. <servername> administrators:   domain admins     admin1     admin2   domain\group1     domain\user1     do...

hi all. have windows small business server 2008 .my problem trying setup vpn clients can access server remotely. have been through routing , remote access server wizard , set up.at end when tries start service not able start service . i have run through nps settings still same issue. can please guide me step @ time this. start fresh tis setup cover steps properly.so maybe if uninstall related routing , remote access amd nps , start again. please help krsnastu108 hi, please check if have set correctly nps configuration. network policy server-> accounting->configure sql server logging-> data source box had database name: had 2 options : add , clear: clicked on “clear” option , hit ok , apply. if issue persists, please let me know error message when trying start service. meanwhile, check related logs in event viewer. niki han technet community support Windows Server ...

basic – redirect local userprofile location \\server01\userprofiles\%username%\application data how can redirect application data desktop document server. thanks. john hello, to redirect desktop documents, can use folder redirection desktop elements:  http://www.virtualizationadmin.com/articles-tutorials/terminal-services/performance/configure-folder-redirection.html note not idea redirection application data. more here:  http://oreilly.com/pub/a/windows/2004/08/24/folder_redirect.html   posting provided "as is" no warranties or guarantees , , confers no rights. microsoft student partner microsoft certified professional microsoft certified systems administrator: security microsoft certified systems engineer: security microsoft certified technology specialist: windows server 2008 active directory, configuration microsoft certified technology specialist: windows server 2008 network infrastructure, configuration mic...

i change checkbox text size using api "setwindowtheme(m_hwnd, l"checkbox", l"checkbox");", , handle wm_ctlcolor message , change color using settextcolor. after change size , text color of check box,  checkbox don't show on windows 2016 tech preview 5 server core. (windows 2016 desktop ui has't problem). it seems bug of windows 2016 server core (without desktop ui).  please check it? thanks, recky hi, try run application on windows server 2012/2012 r2 core edition , confirm see if same problem happen. if same problem happens on previous os version, seems not supported on core edition. related os coding/internal structure, belongs product developer team might provide more official/professional explanation you.   if problem happened on ws 2016 tp5, recommend post on microsoft msdn forum(coding professional) further identify problem, whether os related, or coding related: https://social.msdn.microsoft.c...

i have installed brand new windows server 2012 r2 instance 8 processor cores , 16gb ram , 2tb disk. i installed wsus server role , chose quite few classifications (we have large environment servers , desktops ranging xp/2003 way 10 , use 60% of product classifications because have *lot* of microsoft products. when click on udpates list , set show me "unapproved" "any" wsus client crashes , "error : connection error. error occured trying connect wsus server..." click reset server node try connect server again. things have tried fix : 1)all windows updates installed internet, nothing out of date. 2)reboot.  allow me load console looking @ lists of updates "all udpates" list crashes again 3)this : https://support.microsoft.com/en-us/kb/3159706.  helped until tried approve packages, after approving 2000 died again. 4)restarting wid service, wsus service , iis services (and related services).  nothing! so no matter do...

hello all! i've inherited 2 node physical 2012 r2 file server cluster contains few smb shares on single clustered disk.  i'd enable shadow copies shared disk want store shadow copy data on own shared disk per shadow copy best practices (at least on non-clustered file servers). i created second cluster disk, assigned it to same resources smb clustered disk.  now historically i've enabled shadow copies through computer management want ensure shadow copies cluster aware in failover cluster manager open storage | disks , right click smb cluster disk , click shadow copies tab. tab can enable shadow copies, sounds i'm looking for, unfortunately not give me option choose disk/volume store shadow copy data, can't right. my next step connect computer management cluster virtual server name (nocfs4) , through system tools | shared folders | tasks | configure shadow copies it shows me the correct number of shares on smb cluster disk plus ...

hi i have domain server 2008.i create user admin2 whit group same administrator user in member of(same enterprise admin, domain admin, shema, administrators,....).this user backup of user administrator.when login admin 2 in client win7, dont create file in root drive c or folder windows , system 32. , software no corect install whith user. need user same user administrator thank on system, need check member of local administrators group , make sure new user part of or part of group part of it. there might script or restricted groups gpo defining local administrators group membership. this posting provided no warranties or guarantees , , confers no rights. ahmed malek my website link my linkedin profile my mvp profile Windows Server  >  Windows Server General Forum ...

we copying data server in 1 domain new hardware in different domain. there 2 way trust between domains - destination domain (domain2) forest root of source (domain1). when copy data using robocopy when looged on administrator of the forest root domain (domain2) using command below copies ok few access denied errors. robocopy.exe e:\data i:\ /s /b /r:0 /mir /nfl /ndl /tee /copyall /w:1 /log+:c:\san\08718dc-data.txt  to try around of permissions errors try logging in domain admin on source domain (domain1) - i.e. domain source server currently. when run above start getting following errors: error 1314 (0x00000522) copying ntfs security destination directory e:\data\folder\filename   a required privilege not held client. the account log in has full permissions on source , target. my questions are, error suggest wrong ? also, why destination showing e:\data...  when source ? thanks   /b requires backup , restore privileges.  mak...

hello guys, i trying setup new 2008 windows cluster. have installed failover clustering on both servers. when try validate nodes (validate cluster configuration) local node validating. during server selection validation enter name of second node , fails below error "failed validate node 'node2.mydomain.com'. unable connect 'node2.mydomain.com' via wmi. this may due networking issues or firewall configuration on 'node2.mydomain.com'. value not fall within expected range" i have checked on both nodes, windows firewall has been setup allow failover clustering , wmi well. i tried turning off windows firewall on both nodes. still no joy. i ran wmidiag on both nodes. cannot find interesting there. checked permissions on wmi root. looks ok. administrators have full rights. could please point out missing.   cheers! this fixed. firewall issue blocking rpc ports. ...

hi  , i looking compatibility matrix ibm's blade hs21 , hyper-v 2012 couldn't find . does know if it's officially supported , can find matrix ? thanks hi stefano, in windows server catalog can find supported hard- , software. www.windowsservercatalog.com for ibm servers: http://www.windowsservercatalog.com/results.aspx?&chtext=&cstext=&csttext=&chbtext=&bcatid=1333&cpid=949&avc=38&ava=39&avq=0&or=1&pgs=25&ready=0 ( hope link works) best regards, jens jensit.wordpress.com Windows Server  >  Hyper-V

hello i have 30 users on win2003 server which moved hq. newly established branch, roaming profile. gave them access via terminal server. because of roaming profiles computers now connecting slowly. best solution ? shall move roaming profile on terminal server? if know of step step guide plz share best regards gamli typically, it's not idea physically separate ts servers , user data (including profiles) if don't have enough network bandwidth. when looking solution, there several options. 1 option folder redirection, improves logon performance but may influence application runtime behavior in negative way. option caching user profile data on ts server, works if it's 1 server. a third option strict profile management, using products such immidio flex profiles, appsense environment manager, rto virtual profiles or citrix user profile management. benny Windows Server ...

i have kms server setup activate windows servers in network. troubleshooting permission related issue activation. testing purpose, need deactive windows server sometime. is there command can that? the server has been activated already. tried use slmgr -upk, -rilc swithes deactivate can testing. seems once use -ipk swith install kms client key, activation information still there. my need simple, once server got activated via kms, how make roll status before activation? i using vmware snapshot solution think there should windows command can samething. hi,   if want activate system, use slmgr /ipk , slmgr /ato install key , activate system. can use slmgr /dlv check results after doing this. if want deactivate system, use slmgr /upk uninstall key. can use slmgr /dlv check results after doing this.   you cannot deactivate system without uninstalling key.   tim quan   Window...