DNG

dear all,            have built nic team of 2 physical interfaces.  created team interfaces can assign more networks nic team, team interfaces not working.  when provide tcpip settings nic team, can response nic team, when put tcpip settings on team interfaces, no response.  team interfaces unable receive packets though sending packets away.  wrong?  worked once physical nics configured promiscuous mode.  literally wasted half week due negligence network team. thanks anyways. Windows Server  >  Windows Server 2012 General

hello, have domain on win 2003 (2003 functional level). with delegation wizard, have delegated full control ou user, can manage himself (he logs on dc). the problem is, can create gpos, if tries edit or delete them gets error message: "failed open group policy object." details: "the system cannot find path specified." by way, installed gpmc on dc, cannot run "gpedit.msc": gets error "you not have permission perform operation - access denied". how can give capabilty create/edit gpos on ou user? he member of "remote desktop users" , "group policy creator owners" groups, of course not domain admin. thank much.   just check security tab on policies folders trying edit. andrei ungureanu Windows Server  >  Group P...

hello people, i have tmg 2010 server in domain, , every time reboot server, error message appears below:   the security system not establish secure connection servidorldap / registro.local / registro.local @ registro.local. no authentication protocol available. the server windows 2008 r2, network have 2 domain controllers on single domain. have no branches, , tmg on same network dcs what guys think problem? mcp - mcts i believe error due broken secure channel. more on secure channel. http://awinish.wordpress.com/2010/12/24/when-secure-channel-is-broken/ you can use mvp joe's repair broken secure channel issue. http://blog.joeware.net/2012/06/07/2513/ awinish vishwakarma - mvp my blog: awinish.wordpress.com disclaimer posting provided as-is no warranties/guarantees , confers no rights. Windows Server  >  ...

hi, in our office pre prod environment implementing efs certificates , through pki auto enrollment. certificates getting generated automatically without issue, along i'm getting self signed efs certificate. please me stop generating of self signed certificate , else provide reason of why generating. thanks help hariharan  this occur default if client needs encrypt hasnt completed enrollment efs certificate ca first. can prevent self-signed efs certificates via gpo: the policy setting efs located in group policy editor under  local computer policy\windows settings\security settings\public key policies\encrypting file system . right click, properties - on general tab select allow efs, , click certificates tab. uncheck box self-signed certificates. mark b. cooper, president , founder of pki solutions inc., former microsoft senior engineer , subject matter expert microsoft active directory certificate services (adcs). known “the pki guy” @ microsoft 10 years. c...

looking how on disable "export grade cryptography cipher suites". due drown. windows 2008 r2 https://support.microsoft.com/en-us/help/245030/how-to-restrict-the-use-of-certain-cryptographic-algorithms-and-protocols-in-schannel.dll confusing @ best. sslv2 has been disabled , server rebooted. looking cipher suites disable. thanks. hi, please check see if article “tls/ssl settings – section ciphersuites” helpful: https://technet.microsoft.com/en-us/library/dn786418(v=ws.11).aspx#bkmk_schanneltr_ciphersuites secure sockets layer protocol: https://msdn.microsoft.com/en-us/library/windows/desktop/aa380124(v=vs.85).aspx best regards, eve wang please remember mark replies answers if help. if have feedback technet subscriber support, contact tnmff@microsoft.com . Windows Server  >  ...

hello sir  this side sunny mathur. have windows server 2008 r2 standard edition , rebooting continuously @ splash screen , appear black display mouse cursor , restart again , again. not getting start in safe mode , last know configuration etc.... bt working on dsrm mode bt our dns not working on mode without dns active directory wil never work.. useless when open in dsrm mode... facing problem since have installed new hard drive bcoz 1 disk had failed , installed new hard drive , rebuild properly. raid 5 working please sir provided me best solution our server.. grateful u sir  thank sir i'm assuming psychical server ? sounds have hardware fault somewhere reboots continuously happen are able see logs on server find out if there hardware or driver issue ? Windows Server  >  ...

hi have customer that are looking advice on how reduce number of print queues or print management.they have around 300 employees with around 30 branch offices. there around 40 network printers configured 200 print queues.  every printer configured every option printer has, configured print queue. example konica minolta bizhub c220 has option have 3 trays , can print in both color , noncolor, equals 6 print queues. print queues named according to: officename-printermodel-color/noncolor-tray, example: nyc-kmc220-co-tray1. results in lot of print queues lot more user friendly user needs choose right printer right options instead of going properties of printer it. time consuming staff configure every time there new printer. if has advice please help.   train users configure themselves?? it seems have made 'easy' staff , making change requires them more select printer not acceptable. the solution in place sounds like an administrative nig...

hello. i new windows server world bear me, please. we have mandatory profile here faculty. when logon first time machine group policy applied (my documents removed desktop). however, when log out , log in same user documents icon shows on desktop along web folders in computer. if delete user profile, first time log in, documents removed desktop. however, second time log in documents appear on desktop, again. i ran rsop.msc , shows "remove document icon on desktop" enabled. running gpupdate.exe not change anything, running gpupdate.exe /force remove documents icon desktop. any appreciated. thank you hello pyther24, computers running on windows xp/vista/7, fast logon optimization feature set default both domain , workgroup members. when logon optimization on, user may need log on computer twice before folder redirection policy , software installation policy applied. because application of these types of policies require synchronous application of policy....

hi! if run mbsa (2.2.2170) against 1 of xp sp3 machine, received alert regarding kb954430 not being installed. receive same alert if run "windows update". patch not detected wsus client, machine,  patch status shows "not applicable" in wsus console report viewer. why wsus client doesn't detect update ? thanks help. chris.   (wsus : version : 3.1.6001.65) http://support.microsoft.com/contactus/cu_sc_selector_telephone?ws=support   lawrence garvin, m.s., mcitp:ea, mcdba, mcsa principal/cto, onsite technology solutions, houston, texas microsoft mvp - software distribution (2005-2010) mvp profile: http://mvp.support.microsoft.com/profile/lawrence.garvin blog: http://onsitechsolutions.spaces.live.com Windows Server  >  WSUS ...

is there native utility in word 2007 or word 2010 remove headers , footers multiple documents in batch-wise process?  targeted document population contains mix of .doc , .docx files. we migrating new edms.  our current headers/footers contain, example, document numbers not same in new system.  therefore, need strip out headers , footers native word content before migration.  doing manually prohibitively time consuming. thanks, jcb jcb a macro doing find/replace on documents in single folder shown in http://www.word.mvps.org/faqs/macrosvba/batchfr.htm . macro can used framework task. the code related directly find/replace changed step through each section of each document, setting text of each of 3 headers , 3 footers (primary, odd page, , first page) empty string. code of sort can found @ http://www.word.mvps.org/faqs/customization/replaceanywhere.htm . to catch both .doc , .docx files, add question mark in expression dir$(pathtouse & "*.d...

i've tried fix can't seem find way.  the disks included below.  problem physicaldisk0 failing , not remove storage pool.  if unplug drive can't mount virtual disk @ all.  have shut server down , reattach drive mount virtual disk. trying remove powershell nets this: physicaldisk : 1 of physical disks specified not removed because still in use. i've tried can find.  added physicaldisk 7 take on 0 no matter how many times run repair virtual disk remains in degraded state.  other blowing away entire pool can't think of way fix this... i deleted virtual disk , second did remove disk pool no problems. Windows Server  >  File Services and Storage

i trying create powershell script creates necessary target directory structure me when copying files. since source directory structure can vary process process, want avoid pre-creating directory structure , instead create on target based on structure present in source directory. i have semi-working solution right now, however, problem current script is creating directory structure , copying files destination structure, also copying files root of folder! i copy files root of folder , avoid other extraneous file copies. this code using right now: $srcfiledirectory = "c:\myfolder1" $destdirectory = "c:\copytest" #get files in directory structure $files = get-childitem $srcfiledirectory -recurse foreach ($file in $files) { copy-item -path $file.fullname -destination $destdirectory -recurse -container }#foreach it worthwhile note not want copy directory structures verbatim.  want able "cherry pick" files reading them text file have code fol...

hi, i recently setup dedicated fax server on fresh install of server 2012 r2. no other programs installed, role. able setup server fine (we have setup send faxes, not receive). reason, shortly after setting up, fax service keeps stopping. i'm not sure @ why. following copied event viewer: faulting application name: fxssvc.exe, version: 6.3.9600.16384, time stamp: 0x5215e627 faulting module name: fxst30.dll, version: 6.3.9600.16384, time stamp: 0x5215eb1a exception code: 0xc0000005 fault offset: 0x0000000000005371 faulting process id: 0x6d8 faulting application start time: 0x01cf7c2826454d62 faulting application path: c:\windows\system32\fxssvc.exe faulting module path: c:\windows\system32\fxst30.dll report id: 7ab76b62-e81b-11e3-80c7-001cc086f517 faulting package full name: faulting package-relative application id: also, when go fax service manager, every "forgets" device (the modem) under outgoing rules , have choose drop down list (th...

good day, before begin need explain 1 thing not sql guy know little it.  being said here problem , hope can me through this. i have sce 2010 setup has wsus on it.  running on windows 2008r2 sp1  have found artical how prep database before installing update.  after lot of talking able find wsus can lauch , go can run the clean wizard. (have not done yet want clean database first)  problem connecting database.  using internal database , after looking around found database called susdb susdb_log too. when go sql management studio (it says sql server 2008) click on compact , type in following path c:\program files\microsoft sql server\mssql10.essentials\mssql\data\susdb this path shows when @ databaswe from explorer database.  database there in data folder when try connect following error cannot connect c:\program files\microsoft sql server\mssql10.essentials\mssql\data\susdb additional information the database file can...

hi, inside win 03 machine, see below. http://dl.dropbox.com/u/40211031/t187.png can further use 'workgroup' current domain or not? many & best regards, hua min yes can use "workgroup"  domain there should no issues @ all.  note: if connected on network , connect computer using name of other machine should have same workgroup name mentioned on destination computer other wise not able access other computers on network bearing different workgroup names.  to access computers different workgroup names on same network can use ip address example  \\192.168.0.1\sharename for more information read this  http://windows.microsoft.com/en-in/windows7/what-is-the-difference-between-a-domain-a-workgroup-and-a-homegroup   http://www.arabitpro.com Windows Server  >  ...

hi   i have windows 2008 r2 server. on reboot, 5% of time windows firewall services doesn't start. in security event log, following 2 errors appear: 5027: windows firewall service unable retrieve security policy local storage. windows firewall continue enforce current policy. error code: 2147943860 5028: windows firewall unable parse new security policy. windows firewall continue enforce current policy. error code: 2147943860. i able start service manually no issues. any ideas? thanks andrew hi,   i confirm have third party antivirus program installed?   if so, please temporarily uninstall check result.   if not work, please disable firewall gpo , create new 1 fix issue.   regards, please remember click “mark answer” on post helps you, , click “unmark answer” if marked post not answer question. can beneficial other community members reading thread. ...

i searched "space in path" both here , in google , found lots of information none of suggestions seem work.   following script runs start\run command prompt, demo.exe program(a c# program) throws system.io.exception: handle invalid. i think because exe  argument, contains space, not enclosed in double quotes. how done? tried using 2 sets of double quotes , 3 sets did not work either. if path not contain space, no exception , demo.exe program displays in console window. however, if run same script inside powershell console, io exception. separate issue, have been reading, way path must handled varies on how script executed. $exe=& "c:\development test\demo.exe" #the following works because has no spaces #$exe="c:\development\demo.exe" $cmd="${exe}" invoke-expression $cmd works me when use: $exe = "& 'c:\development test\demo.exe'" richard mueller - mvp directory services ...

we trying push out software clients (xp) in multi-location wan. we'd able have software on each of dcs (w2k3) , clients pull local source. i've done in the past create separate gpo each of software deployments , each of geographic, way cumbersome. looking for simpler. few more details: clients xp each location has dc running win 2003 there total of 14 locations, includes data center wan links t-1 software being deployed includes acrobat reader , few others. thanks, md without incorporating 3rd party tools altiris or using other tools ms system center configuration manager drop install packages, currrent process (best) choice have. http://technet.microsoft.com/en-us/library/cc738858(ws.10).aspx Windows Server  >  Group Policy ...

when opening existing document or creating new, table of content , page numbers reflect code {toc ... etc..} or {page}.   others when viewing same document see table of content or page numbers.  appears on system only.  have deleted copy , reloaded software again , still happening.  there setting need change or update remove action, can see actual table of content , page number instead of code? any assistance has appreciated. you have word's field code display toggled 'on'. can toggle on/off via alt-f9, or via file|options|advanced>show document content>show field codes instead of values. cheers paul edstein [ms mvp - word] Microsoft Office  >  Word IT Pro Discussions

hello cant figure out how give user custom permissions example if create group name app installers how create permissions in group able install type of software onto client computer trying todo hello, use restricted groups feature gpo add local machine admins: http://www.frickelsoft.net/blog/?p=13 best regards meinolf weber disclaimer: posting provided "as is" no warranties or guarantees , , confers no rights. Windows Server  >  Directory Services

hi, i m unable move sql instance node b a. when checked cluster.log, error see before failed. can 1 me fix this. - working earlier not new cluster, no config changes made. 000015fc.000035d4::2014/06/04-07:27:05.204 err   [res] sql server <sql server (sqlshr)>: [sqsrvres] odbc sqldriverconnect failed 000015fc.000035d4::2014/06/04-07:27:05.204 err   [res] sql server <sql server (sqlshr)>: [sqsrvres] checkodbcconnecterror: sqlstate = 08001; native error = ffffffff; message = [microsoft][sql server native client 10.0]sql server network interfaces: error locating server/instance specified [xffffffff]. 000015fc.000035d4::2014/06/04-07:27:05.204 err   [res] sql server <sql server (sqlshr)>: [sqsrvres] odbc sqldriverconnect failed 000015fc.000035d4::2014/06/04-07:27:05.204 err   [res] sql server <sql server (sqlshr)>: [sqsrvres] checkodbcconnecterror: sqlstate = hyt00; native error = 0; message = [micro...

hello everyone, i'm trying write script refresh specific ie webpage login on webpage doesnt logout/timeout. used below script in vbscript , worked fine until upgraded ie10. set ie = createobject("internetexplorer.application") set wshshell = createobject("wscript.shell") ie.navigate "https://social.technet.microsoft.com" 'call webpage ie.visible = true wscript.sleep 15000 'sleep 15 seconds allow web page enough time load 'criteria selection while true ie.document.getelementsbyname("status")(2).checked = true dim sel sel = ie.document.getelementsbyname("sort") sel.options(1).selected = true ie.document.all.item("go").click() wscript.sleep 300000 loop so i'm more familiar powershell thought of writing script in powershell. on doing research, found article (http://www.sharepointfix.com/2014/09/powershell-re...

https://community.office365.com/en-us/f/158/t/228495 dear adfs forum engineers , members, i refer case on top. we use on premise mdm solution exchange online. search has indicated lot of our users connecting office365 mailboxes using eas via either outlook app or native mobile device apps. want restrict email access using our mdm.  basically our goal users try connect through eas whatever client use should not granted access mailboxes. way should install our mdm application , should able access mail.  the built in claim rules on adfs not answer our custom demand.  has experience such request? information provided highly appreciated. thank you, a.kurtay please use adfs forum , ask question. seems more suitable ad fs forum: https://social.technet.microsoft.com/forums/en-us/home?forum=adfs devaraj g | technical solution architect Windows Server ...

i use rd client app on ios connect pc via vpn, after latest update, connect, blank screen, neither clicking done nor cancel anything. have force close app. so app totally useless. not sure kind of testing guys do, need @ least use app before submitting check if works. device iphone 6s on ios 9.3.2 hi guys, the new version 8.1.23 has been published, should have issue fixed, please download , install latest version. https://itunes.apple.com/en/app/microsoft-remote-desktop/id714464092?mt=8 best regards, amy please remember mark replies answers if , un-mark them if provide no help. if have feedback technet subscriber support, contact tnmff@microsoft.com. Windows Server  >  Remote Desktop clients

hello, i am trying move virtual machines windows 2008 r2 sp1 hyper-v cluster new windows 2012 r2 hyper-v cluster. i followed recommedation of following link http://blogs.msdn.com/b/clustering/archive/2012/06/25/10323434.aspx?pageindex=3#comments i've done tests move virtual machine , works fine , had problems because in resource volume migrated virtual disks stored belonging virtual machines on other nodes in cluster of windows 2008 r2. so when resource volume dismounted in windows 2008 r2 cluster recommended guide, virtual machines have not yet migrated stop working properly. is there way make migration of virtual machines only, without migrating entire volume ? the guide suggests migration can done using scvmm 2012, not find guide using scvmm 2012 migration . i appreciate advice can give me . thank you. best regards, manuel manuel&#180;s microsoft forums threads the method described in blog post assumes whole volume going moved. impossible share ...

hello, i have strange problem , hope me.  have 4 vmware hosts. @ time our dcs located on same host.  works great. the problem when try move 1 of dcs host.  receiving replication errors. if try replicate sites , services, receive error message: remote procedure call failed , did not executer. if try run repadmin /syncall command, receive different errors different dcs.  dcs on old host report: syncall reported following errors: error contacting server f5042fb2-9950-425f-a567-f2a2d847b48b._msdcs.domain.local (network error): 1727 (0x6bf):     remote procedure call failed , did not execute. dc moved new host reports: syncall reported following errors: error issuing replication: 1726 (0x6be):     remote procedure call failed.     from: c627e563-756f-4256-b098-1fc8408e0a14._msdcs.domain.local     to  : f5042fb2-9950-425f-a567-f2a2d847b48b._msdcs.domain.local can me this?  runni...

hi i looking way add sidhistory ad attribute. have 100 users moving on form company us, have groups , users sid values, extracted , gave me. dont want domain trusts. have 1tb worth of data restoring backup got other comany has these groups , users sids on it. have created user in our ad , looking way add sid values sidhistory attribute these users can gain access folders no issues. any appreciated. je jeevan ma masti nathi te jeevan ni hasti nathi ane masti vali jindagi malvi kai sasti nathi... sid history insert / add :http://social.technet.microsoft.com/forums/en-us/winservermigration/thread/b6d6245f-1883-4412-9aaa-e52da8fbf069 best regards, sandesh dubey. mcse|mcsa:messaging|mcts|mcitp:enterprise adminitrator | blog disclaimer: posting provided "as is" no warranties or guarantees , , confers no rights. Windows Server  ...

  wtf?  started using windows server 2008 , noticed in file explorer there's apparently no "size" column anymore!  why in god's name take away???  if file explorer wasn't bad enough not showing folder sizes, let's take away files now?   bizaare....  there ways size column restored?  doesn't appear when use "choose details" dialogue right-clicking folder either.  looking inside dialogue "size" detail isn't there!   can explain what's going on?   gratefully, ross dcx3 that's beyond bizarre.  sure haven't developed cataracts or something?  size 1 of default columns , should present in choose details dialogue.  in choose details dialogue, size 4th item in list. Windows Server  >  Windows Server General Forum ...

i'm trying demote dc i'm getting following error : the operation failed because: active directory not transfer remaining data in directory partition :cn=schema,cn=configuration,dc=domainname,... "the rpc server unvailable" any help is last server in environment? otherwise should check dns settings , verify name resolution   deli   Windows Server  >  Directory Services

hi, i running wall trying research problem having while trying build dc environment in server 2008 r2. i using 3 dcs, dc_noc, dc_locationa, , dc_locationb in front of 12tb san, profiles mapping drives san each dc iscsi initiator. each dc servicing it's own area.  my problem/question is: if dc_locationa goes down, how able have profiles on dc w/mapped drives specific dc remain accessible while dc_locationa still down without having go in 1 one , re-map drives hand? thank you! hello, using dc kind of setup not optimal solution, dcs should not sued way, let them basic job, ad/dns/gc , use member servers user data instead. if high availability needed think clustering solution, maybe on different subnets, possible windows server 2008 ee/dc , higher os. best regards meinolf weber disclaimer: posting provided "as is" no warranties or guarantees , , confers no rights. Windows Server ...

hi - concernced users can delete office set-up files in disk clean-up whilst logged in restricted users. we on satellite site not have office 97-2003 disks hand re-install.  new job told not run office centrally - , setting fileserver users' log-ins. so - when users log in onto win xp machines, system able replace these office set-up files if needed?  or alternatively need remove option disk clean-up , f - how do that? thanks if can this.  mal. hi,   please discuss issue in our office or windows xp forum:   office forum: http://social.technet.microsoft.com/forums/en-us/category/officeitpro,visio2010,grooveserveritpro   windows xp forum: http://social.technet.microsoft.com/forums/en/itproxpsp/threads   tim quan   Windows Server  >  ...

i want know different between domain , workgroup  what works of domain in network? a domain has centralized user computer and security management. it, exmaple, allows loging in multiple computers using single set of credentials. a domain requires server manages computer , users in kind of database. nowadays called active directory. http://technet.microsoft.com/en-us/library/bb742424.aspx a workgroup no more group of individual computers, configured common workgroup name, can identify , search each other. still requires user , security managemnt on each individual computer. mcp/mcsa/mcts/mcitp Windows Server  >  Setup Deployment

i have text file has format , ends each line crlf. want remove dups file. found few examples seemed double file size when creating new file without dups and seemed usable. take file use sql(dts) load text file table. want scrub text file before loading.   "test1"|"455"|"34166"|"06/23/11" "test2"|"450"|"34167"|"06/23/11" "test2"|"450"|"34167"|"06/23/11"  thanks.   add out-file. gc file.txt | sort -uniqu | out-file result.txt or gc file.txt | sort {$_.split("|")[2]} -unique | out-file result.txt Windows Server  >  Windows PowerShell

hello, i trying update alert system dell chassis controller unit. using exchange 2003 , upgraded 2007. entered ip address of controller previous exchange relay , emails able flow through. now, when add receive connector hub transport screen ip address, controller keeps telling me cannot speak smtp server. difference between old exchange , new, old used domain controller, new 1 not.  any appreciated!! tried dell support no luck.  you need check send connector, not receive connector. sure it's selected none security. mcp | mcts 70-236: exchange server 2007, configuring twitter - @yagmoth555 ( ) blog: http://www.jabea.net  |  http://blogs.technet.com/b/wikininjas/ Windows Server  >  Windows Server General Forum ...

i trying write script query multiple servers multiple processes each process thread count.  see below have working 1 process , output displays below. get-wmiobject -class win32_process -computername server1,server2,server3,server4 | where{$_.processname -eq "notepad.exe"} | select-object processname, handles, threadcount | sort-object $_.processname -descending | ft -auto processname handles threadcount ----------- ------- ----------- notepad.exe      50           1 notepad.exe      50           1 notepad.exe      50           1 notepad.exe      50           1 is possible multiple statements such {$_.processname -eq "'notepad.exe','paint.exe','winlogon.exe','excel.exe'"}.  i have tried failed.  what proper way query muliple servers multiple processes?  i looking id...

just installed new win2008r2 servers.  need set either vpn direct access.  benefits/costs either system?  why should use 1 on other? thanks. this article made microsoft employee steve shen named "direct access vs. vpn connection". http://blogs.technet.com/b/steve_chen/archive/2010/02/03/direct-access-vs-vpn-connection.aspx please read it.   posting provided "as is" no warranties or guarantees , , confers no rights. Windows Server  >  Network Infrastructure Servers

hello, i'm working on nps server in order authenticate our wireless network peap , windows credentials. i'have make tests computers client on windows 7, work well. i'm doing same test windows xp client , have error message on nps server : le serveur nps refusé l’accès à un utilisateur. contactez l’administrateur du serveur nps pour plus d’informations. utilisateur　: id de sécurité　: ****\******* nom de compte　: ****\******* domaine de compte　: **** nom de compte complet　: ****\******* ordinateur client　: id de sécurité　: null sid nom de compte　: - nom de compte complet　: - version du système d’exploitation　: - identificateur de la station appelée　: 0024.97b6.xxxx identificateur de la station appelante　: 001f.3b2a.xxxx serveur nas　: adresse ipv4 du serveur nas　: 172.20.xx.xx adresse ipv6 du serveur nas　: - identificateur du serveur nas　: ap type de port du serveur nas　: sans fil - ieee 802.11 port...

hi guys, i try deploy new virtual desktop collection win8 vdi's (pooled/managed) based on custom answer file. needs automated working server manager not option, that's why answer file needed. the lab environment based on windows server 2012 , win8 enterprise only. functional level etc. off course windows server 2012. i use following command: new-rdvirtualdesktopcollection ` -collectionname "pooled managed win8" ` -description "this collection contains pooled , managed win 8 vdi machines." ` -ou "vdi" ` -connectionbroker "rdscb01.lab.local" ` -pooledmanaged ` -customsysprepunattendfilepath "\\hyper02\_unattend\oobe-only.xml" ` -virtualdesktopallocation @{"hyper02.lab.local"=3} ` -virtualdesktopnameprefix "pooled-win8-" ` -usergroups "lab.local\domain users" ` -maxuserprofiledisksizegb 1 ` -virtualdesktoptemplatehostserver "hyper02.lab.local" ` -virtualdesktoptemplatename “_win8-temp...

hi all, wanted ask general (or specific) clarification on how best handle followig. first configuration background: single-server environment, 2003 r2 dc/file server. replacing new 2008 r2 machine, again dc , file server. current mix of desktop systems include xp, vista, , 7.  users set roaming profiles.  so issue there: as result, 2003 system has user master folder profiles within it, , of course beacuase of desktop os mix, there profile, profile.v2, , profile.v2.v2 folders many users have @ least 2 profiles floating around.  unfortunately, these users still float between systems it's not can consider xp profile folder obsolete.  so i'm wondering how should stuff moved on new server that'll in new domain, , link them newly created users there.  after having researched such things usmt , other options, ultiamtely, decision made copy profile folders over (taking ownership necessary allow me carry out without access denied errors), , on...

hi i implemented one gpo add url in windows 7 users favorites. have added 2 time , was reflecting after implementing gpo. deleting 1 url gpo have made checked the setting (delete existing favorites , links, if present) , select url , clicked apply. after checking these setting in gpo, local favorites has been deleted users profile , getting lots of end users call favorites missing. there way recover or restore favorites has been deleted group policy settings? hello, gpo questions please ask in http://social.technet.microsoft.com/forums/en-us/winservergp/threads see here gpo restore: http://technet.microsoft.com/en-us/library/cc759276(v=ws.10).aspx http://www.frickelsoft.net/blog/?p=42 best regards meinolf weber mvp, mcp, mcts microsoft mvp - directory services my blog : http://msmvps.com/blogs/mweber/ disclaimer: posting provided no warranties or guarantees , confers no rights. ...

good day, while removing service record dns (windows 2003 environment) have deleted mistake following folder : forward lookup zone--domain.internal--_msdcs--gc can dns rebuild folder automatically , or have restore backup? i f have restore backup , can restore folder alone without restoring whole system state ? regards elias dayeh hi, go tcp/ip property > advanced> dns , ensure "register connections address in dns" checked. proceed this: run below commands on problem dc and verify the subfolders in dns : net stop dns & net stop netlogon & ipconfig /flushdns & net start dns & net start netlogon & ipconfig /registerdns & netdiag /fix if above not follow : http://support.microsoft.com/kb/310568 or http://support.microsoft.com/kb/817470/ best regards, abhijit waikar. mcsa 2003 | mcsa:messaging | mcts | mcitp:server administrator | microsoft community contributor | my blog disclaimer: posting p...

we have 2 aging domain controllers , planning hardware upgrade both.  along hardware upgrade we'd raise forest functional level.  question this: can stand couple of 2012 r2 dc's, decom old dcs, raise forest functional level 2012 r2? our environment single domain two server 2003 r2 sp1 dcs.  current domain/forest functional level 2000.  old dcs rather brittle in terms of configuration , i'd limit configuration changes them. once have new 2012 r2 dc's online, configuration tasks necessary before powering off old dcs? the windows 2012 r2 final edition yet released & date somewhere around 18th of oct 2013. coming question, can raise dfl/ffl 2012 r1, cautious if have 3rd party apps such unix/linux or legacy application running might not function way used post upgrade. confirmation vendor before rolling out changes. http://blogs.technet.com/b/askds/archive/2011/06/14/what-is-the-impact-of-upgrading-the-domain-or-forest-functional-level.aspx http:/...

my company has windows 2003 standard server came pre-installed 3 hard drives in raid 5 config,we installed 3 drives of higher capacity in raid 5 config.i trying move shared files , folders old drives new ones while maintaining permissions.i thinking using acronis image old drive , restore new one,but if there other methods know,also if there problems acronis method please let me know,thanks. you can use robocopy or file server migration toolkit, http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=10268 blogging windows pros @ www.theexperienceblog.com Windows Server  >  Management

i have msdn subscription , usages clarified. would able use subscription installing os build server?  internal nuget server?  source code server?  these severs used part of development of software, i've seen suggest such servers considered production servers , require retail licenses. the dedicated msdnfeedback forum here: http://social.msdn.microsoft.com/forums/en-us/home?forum=msdnfeedback mike moderator there, , helpful msdn subscription questions. the white paper suggested dave resource, , includes several scenarios understand use-rights msdn subs. don (please take moment "vote helpful" and/or "mark answer", applicable. helps community, keeps forums tidy, , recognises useful contributions. thanks!) Windows Server  >  Windows Server Ge...

i have been struggling error past week, because hindering ability "set anywhere access". when attempting run dism /online /cleanup-image /restorehealth tool runs 100% gives me error 0x800f081f, tried specifying iso of server 2016 essentials source no luck. any guidance or appreciated. hi, please try run “ scf /scannow ” check , repair system files.  if there error message, please reference “ use system file checker tool repair missing or corrupted system files ” have further identification: https://support.microsoft.com/en-us/help/929833/use-the-system-file-checker-tool-to-repair-missing-or-corrupted-system-files dism.exe, when run below command, dism uses windows update provide files required fix corruptions. make sure system windows update working: dism.exe /online /cleanup-image /restorehealth or, manually assign source location using below command: dism.exe /online /cleanup-image /restorehealth /source: <your source location> /limit...

it has tried twice install brother hl-l8350cdw printer on terminal server remote printing yet when prints squishes printing tiny illegible blur @ top of page. know if this printer supported on ts? hi, in opinion, since printer used terminal server, should supported terminal services. it has tried twice install brother hl-l8350cdw printer on terminal server remote printing yet when prints squishes printing tiny illegible blur @ top of page. know if this printer supported on ts? >>>if doubt printer not supported on ts, suggest try install printer on member server (not install ts roles), , use print check if problem persists. best regards, jay please remember mark replies answers if help. if have feedback technet subscriber support, contact tnmff@microsoft.com . Windows Server  >  ...

hi, i've created custom environment variable i've setup on 2 computers , domain controllers.  want use in profile path in user properties.  when users log in variable taken literally rather being converted value.  example \\fileserver\share\user\%myenv%.v2 generated rather \\fileserver\share\user\envdata.v2 if add in built-in variable such %os%, converts time use custom variable windows doesn't use during logon process.  if open explorer , type in path data should works fine windows picking variable, not using during logon process.  can't seem find technet article states custom variables can't used in profile paths. has else come across this? thanks, tim a corrupt local policy cache preventing gpo sets custom variable on file server.  cache cleared.  problem solved. Windows Server  >  ...

i have added new windows 7 pro windows 2003 domain in morning in afternoon of same day computer stopped connecting domain. can log on pc locally , try change name , add domain dns error. part confuses me. i can ping dc name , name resolves , ip address respond sto ping. i can rdp dc workstation. have tried removing computer name domain users , computers, creating new name or using  same name pc. none of these work. i have disable anti-virus , firewall on client. is there else similat problem has managed solve it? hi,   do receive error if primary dns server client set to 1 of dcs hosts dns role? also, exact error receive?   -- mike burr Windows Server  >  Network Infrastructure Servers ...